Filter by type:

Filter by Fill Material:

Filter by brand:

Josco 125mm Contour Sander

Eliminate hand sanding on curved, fluted or flat surfaces.

Josco 125mm Contour Sander

The Josco 125mm Contour Sander is ideal for decorating, renovating, or restoration jobs. It saves hours of hand sanding on curved or irregular shaped wood and metal surfaces as well as eliminating hand sanding on curved, fluted or flat surfaces.

 

The Josco 125mm Contour Sander is constructed with individual flaps that mould to contours of the work piece and has a long shaft for reaching awkward work areas. Made using the highest quality industrial cloth allows the flaps to expose new abrasive as it wears down. This action prevents clogging and gives a uniform, consistent finish throughout the life of the wheel.

 

Two speed power tools should be used with the Josco 125mm Contour Sander. Use the highest speed for sanding and stripping, and the lowest speed for light finishing and smoothing. Maximum recommended speed is 4,000 RPM and minimum speed is 1,000 RPM. Do not use excessive pressure. Let the contour sander do the work. A course grade should be selected for more aggressive sanding operations.

 

Josco 125mm Contour Sander applications:
  • Sand flutes of radiators and garage doors
  • Prepare louvres prior to painting
  • Renovate furniture
  • Sand carvings and sculptures
  • Restore wood furniture and prepare for varnishing
  • tooltool
  • tooltool
  • tooltool
  • tooltool
  • tooltool
  • tooltool

Specifications

Part number: CONTOURCOURSE

Barcode: 9314028260539

Wheel Diameter: 125mm x 40mm wide

Shank Size: 75mm long x 6mm diameter

Maximum RPM: 4,000

Suitable tools

  • tooltool
  • tooltool
  • tooltool
  • tooltool
  • tooltool
  • tooltool

The Josco 125mm Contour Sander is ideal for decorating, renovating, or restoration jobs. It saves hours of hand sanding on curved or irregular shaped wood and metal surfaces as well as eliminating hand sanding on curved, fluted or flat surfaces.

 

The Josco 125mm Contour Sander is constructed with individual flaps that mould to contours of the work piece and has a long shaft for reaching awkward work areas. Made using the highest quality industrial cloth allows the flaps to expose new abrasive as it wears down. This action prevents clogging and gives a uniform, consistent finish throughout the life of the wheel.

 

Two speed power tools should be used with the Josco 125mm Contour Sander. Use the highest speed for sanding and stripping, and the lowest speed for light finishing and smoothing. Maximum recommended speed is 4,000 RPM and minimum speed is 1,000 RPM. Do not use excessive pressure. Let the contour sander do the work. A course grade should be selected for more aggressive sanding operations.

 

Josco 125mm Contour Sander applications:
  • Sand flutes of radiators and garage doors
  • Prepare louvres prior to painting
  • Renovate furniture
  • Sand carvings and sculptures
  • Restore wood furniture and prepare for varnishing

Specifications

Part number: CONTOURCOURSE

Barcode: 9314028260539

Wheel Diameter: 125mm x 40mm wide

Shank Size: 75mm long x 6mm diameter

Maximum RPM: 4,000